welcome to Jiangyin Fine Chemical Machinery Co., Ltd. advisory hotline:0510-86501561/ 86501562/86501563
Share:
Dedicated to the design and manufacture of equipment in the paint and ink industry
Maintenance method of horizontal sand mill?
Release time:
2024-09-11
Horizontal sand mill the development prospects of the industry is very good, because in the use of the benefits for the enterprise more, so favored by customers, in order to make you more familiar with it, then we will tell about the horizontal sand mill maintenance methods.
Horizontal sand millThe development prospects of this industry is very good, because in the use of the benefits for the enterprise more, so by the customers of all ages, in order to make you more familiar with it, then we will talk about the maintenance method of horizontal sand mill.
Nowadays, there are still many people who do not know some basic information about the horizontal sand mill. Therefore, as a manufacturer, it is necessary for us to explain briefly. In fact, what we need to do in maintaining the horizontal sand mill is to regularly check the electrical equipment, instruments, belts, etc. and adjust them if necessary. Unqualified must be timely repair and replacement; try to avoid open flames and welding. Also check the wear degree of its wearing parts and the fouling of the cooling jacket. If the scale is serious, should use descaling agent cleaning descaling; grease should be replaced regularly; should be detailed inspection of the safety of the electrical system; the next thing to do is to check the horizontal sand mill grounding device; check the cooling circulation system, the use of multi-layer cooling system, to ensure the material temperature, to avoid high temperature loss and reaction. Observe whether the temperature gauge in the grinding room is too high, and set up an automatic temperature protection device. When the temperature exceeds the set detection value, automatic protection; can also check whether the pressure in the cavity of the horizontal sand mill is too high, and set the pressure automatic protection device. Automatic protection when the pressure exceeds the set value probe value. Thoroughly clean and overhaul after one year of use.
During the maintenance of the horizontal sand mill, attention should be paid to prevent the belt from slipping and causing friction and heating, and it should be checked regularly at least once a week. The lubricating oil in the bearing box needs to be added with lubricating oil or solvent after 2 months or 500 hours of use. The mechanical seals used in today's common equipment have high accuracy and durability, and their leakage is small. The loss of oil can be calculated by the drop of the oil level gauge. The working time is within the normal range of 1 ml. Electrical devices and instruments should be checked and adjusted regularly, and unqualified ones should be repaired and replaced in time. Or the horizontal sand mill should be cleaned and maintained for about one year of operation, check the wear of wearing parts, disassemble the inlet and outlet pipe fittings of the outer jacket to check the scaling, and if the scaling is serious, use descaling agent for cleaning and descaling. Replace all lubricating oil of the horizontal sand mill, check whether the electrical system is safe, check whether the instrument is reliable and sensitive; check whether the grounding device is reliable. Over the years, the company has been committed to the expansion and development of domestic and foreign markets, using online Internet e-commerce platform and offline physical sales to go hand in hand.
After the introduction of the above content, we also have a further understanding of the maintenance method of horizontal sand mill. When I see him again in the future, I will not feel strange, and there will be no frequent problems in the process of using it. Well, that's all for today's content. I believe it will bring more wonderful knowledge points.
Previous Page
Related News
Main features of horizontal sand mill
2024-09-11
Maintenance method of horizontal sand mill
2024-09-11
Contact Information
Address: 1490 Xicheng Road, Qingyang Town, Jiangyin City, Jiangsu Province
Hotline: 0510-86501561 86501562 86501563
Email: info@finemachinery.com
Zip Code: 214401
sweep
Browse mobile website
Copyright©2024 Jiangyin Fine Chemical Machinery Co., Ltd.